Netgear Orbi extender and satellite are enough to cover your entire house with WiFi signals. However, to avail of that, you need to first do the Netgear Orbi login. Here are a few steps that you should walk through to do the Orbi login.
With that said, let’s move further. Keep reading.
How to Do Netgear Orbi Login
Plugin Orbi Router
Take the Netgear Orbi router and plug it into the wall socket. Make sure the wall socket is tightly fitted around the router switch. Moreover, it should not be blackened with a short circuit.
Wait For Stable LEDs
Once you plug in the Netgear Orbi router, turn on the power button. After that, you need to wait for a few seconds until the LED lights are stable. Stable LEDs indicate the router has been powered on successfully.
Connect Router to Modem
You should connect the Netgear Orbi router to the modem. Use the Ethernet cable to do so. However, you can also connect both devices wirelessly. While doing wireless connection, make sure you mind the distance between the router and the modem.
Plugin Orbi Satellite
Get the Orbi satellite and plug it into the power socket. While choosing the power outlet, make sure you place it in the same room as the Orbi router. So, both the devices should be near to each other during the Netgear Orbi login process.
Sync Router & Satellite
In this step, you need to sync the Orbi router and satellite. To do so, press the button present on the router and then the satellite. Wait for a few seconds and check for the LED light signaling successful syncing of the devices.
Turn on PC
Turn to your computer and power it on. Your computer or laptop should stay awake throughout the whole Orbi login process. Hence, check the power outlets and cables for any issues. If case of any issues, change or get the cables repaired.
Access Web Browser
Once the PC starts, open a web browser. While doing so, choose the one which has the latest software version. Not just that, you should also ensure that the chosen web browser is compatible with your computer or laptop. To remove any issues, clear its cookies and cache files.
Open Official Orbi Web Address
To access the Netgear Orbi Basic Home Screen, you should enter the official router web address in the web browser. Make sure there are no typing mistakes while entering the official web address. Press the Enter key after typing in the web address.
Do Router Login
A router login page appears after you press the Enter key. You should keep your router login details by your side. Thus, enter your username and password in the allocated spaces. After that, click the Log In button displayed on the screen.
Follow On-Screen Instructions
You get access to the Netgear Orbi router Home Screen once you are logged in. After that, you should go through the on-screen instructions popping up. Finalize the changes by saving the settings that you changed. That’s it! You have logged into the Netgear Orbi router.
Following the above-mentioned steps will save you from any unexpected issues. However, in most cases, users face Orbi blue light issues. That could be because of either technical issues or outdated router firmware. So, if you face that too after doing Orbi login, simply update the router firmware. With that, you get access to a seamless internet connection in every part of your house.